Press and hold the ARM button (lower left) for at least 5 seconds.
Category: Calibration
Articles providing calibration instructions for components and systems.
Altimeter Calibration on Multibus Systems
Altimeter calibration requires adjustment of the instruments expected minimum and maximum indications using servo board potentiometers. The user can normally adjust the instrument accurately within 50 feet of the IOS indication at all altitudes.
Airspeed Indicator Calibration on a 242
Airspeed indicator calibration requires adjustment of the resolvers inside the instrument. The instrument can normally be adjusted to read accurately within 5 knots of GISt indication at all airspeeds.
Altimeter Calibration on a Servo Board
Altimeter calibration requires adjustment of the instruments expected minimum and maximum indications using servo board potentiometers. The user can normally adjust the instrument accurately within 50 feet of the IOS indication at all altitudes.
Magnetic Compass Resolver Calibration
Apply power to the simulator, freeze the simulator, and then set the aircraft’s magnetic heading to a specified value from the IOS.
Set Parking Brake friction, travel, and switch
These instructions are provided to set the Parking Brake friction, and travel, as well as adjusting the Parking Brake switch. Not all parking brakes have an adjustment for friction.
CGI Instrument Calibration Instructions
This procedure describes how to reposition and resize the CGI application window, and individual CGI instruments as well as other key commands. The position and size of the CGI application window, and the instruments are adjusted during initial installation.