The Hobbs Report provides a report of the Hobbs time for each individual kit enabled on your RTD. The CGI Hobbs Meter (if equipped) shown on the Instrument Panel only displays the time for the running model.
Category: Maintenance
Articles related to maintaining and replacing components on your RTD.
Replacing the Computer on the RTD
This article provides instructions for replacing the FPN193353 Computer on an RTD.
RTD IOS Connectivity Issues
This content is restricted, you either do not have permission or need to login.
RTD Installation and Setup
1.Prior to unpacking and setting up your RTD, inspect the pallet and contents for any damage. 2.To set up your RTD, you will need a 7/16” wrench, a 7/16” socket, a 1/4” Flathead Screwdriver, a small level.
Cessna 172 Analog Overlay Trim and Flaps Indicators Not Fully Visible on the LCD
This procedure resolves the issue where the Cessna 172 Analog Overlay panel Trim and Flaps indication on the LCD is not fully visible. This applies to the Cessna 172 Analog panel that has the Trim and Flaps decal installed on the instrument panel.
Trainer Controller Maintenance Password is Missing
The Trainer Controller Maintenance password can become corrupted if the computer has been forced off or has lost power before correctly shutting down.
WARNING: When the computer is not shut down correctly, files can become corrupted. Each time this happens more files will become corrupted, resulting in having to reinstall windows and the system software, causing unecessary down time.
Troubleshooting RTD Software Update Related Issues
This article provides steps for troublshooting issues on the RTD after software updates were installed.
GNS430W Screen Adjustment on the RTD
This article provides the procedures for adjusting the screen position of the GNS430W on the RTD.
RTD Lockable Door Installation
This article provides instructions for installing the lockable door and the power key switch to the RTD.
GNS430W RealityXP License Activation
This procedure outlines the instructions for installing the RealityXP license used for generating the GNS430W’s. RealityXP requires a license file that has to be installed for the GNS430’s to be usable. This file is provided by Frasca International when a GNS430 kit has been purchased after the RTD is first delivered.