The ECL3 system generates one unified fault log for all axes present on the system called Faults.html.
To check the network connection properties to ensure proper communications with the Trainer Network, the following procedure may be used:
Maintenance schedule for the ECL2, and ECL3 Control Loading systems.
Check Friction is used to check for changes in hardware friction. The idea is to help identify hardware components that might be wearing out. If significant additional friction is noticed on an axis, then the hardware should be inspected.
Review the Flight Control Reference (Contact Frasca for the Flight Control Reference Document) document to understand how the force needs to be calibrated.
Review the Flight Control Reference document (Contact Frasca for the Flight Control Reference Document) to understand how the position needs to be calibrated.
Run and connect Control Loading Manager. Click the Update Null Force Offsets button in Control Loading Manager.
Control Loading Manager is the main maintenance program for most tasks in the ECL system. Control Loading Manager is used to perform the following:
This article provides some guidelines on cleaning and disinfecting simulators and simulator equipment.
NetFlash is used to update firmware on ETC+ Modules, EECL Master Modules, and TruFeel2 Modules.