This article provides some guidelines on cleaning and disinfecting simulators and simulator equipment. WARNING: ONLY solutions permitted to clean avionics screens, genuine or otherwise etc. should be used. Don’t spray cleaners directly onto the item. Don’t get moisture into any openings. Use caution when cleaning polycarbonate lenes covering the CGI (Computer Generated Instruments). Recommendations Frasca […]
Category: Visual System
Articles related to the Visual system descriptions, maintenance, troubleshooting, and operation.
I do not have an available Com Port on my Visual PC replacement to control the projector power on/off. How do I fix this?
You will have to install a USB to Serial Converter on the Visual PC to control the power on the projector, then once that is installed the Projector.ini file will have to be modified.
How to install a watchdog timer
Connect the serial cable from Com5 to the Watchdog Timer. Connect the video Y-cable to the image generator…
Saturn visual system projector on/off commands
The visual system projectors on Frasca visual systems are normally turned on and off automatically during the power-up and power-down sequences. If you experience problems where one or more projector doesn’t turn on automatically, there are several things you can try to help determine the cause of the problem.
NEC MT840 Projector Maintenance Program Access
This software will allow the user to adjust individual color brightness and contrast via the visual computers.
Creating Backups of TruVision (Saturn) .ini Files
Saving certain configuration files after warping and/or edge-blending the visual images can minimize the time you must spend re-warping and blending the images in the event an inadvertent deletion or corruption of the visual files occurs.
Cleaning Glass Mountain monitors
Do not clean the surface mirrors unless it is absolutely necessary. The risk of scratching or streaking the mirror surface is very high. Blowing it clean with compressed air or using a soft feather duster is preferred.
Sanyo Projector Starts up then Goes Into Cool Down Mode
Issue: After the Sanyo projector starts up, the LED turns green and then the projector starts flashing red and goes into cool down mode.
Cannon Projector Air Filter Cleaning Realis SX50/SX6/SX60/SX70/X600/X700/SX80
Realis Cannon Projector Air Filter Cleaning
USB Dongle for the Visual/IG Computer is not working
If the TruVision Global log appears on the display, the dongle may be damaged, or not properly installed.